BACK

​

​

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

​

 

🧼 Add-On or Stand Alone Tile & Grout Cleaning

Restore the beauty of your tile floors with deep-cleaning that removes dirt, grease, and discoloration from grout lines and tile surfaces.
 

🔹 What’s Included:

• High-pressure rotary AND fixed head Manual tile cleaning tools

• Grout-safe alkaline or enzyme-based degreasing pre-spray

• Heated extraction for maximum soil removal

• Detail scrubbing for edges and stubborn stains
   

💵 Pricing:

​

$0.50 – $1.00 per sq ft
(depending on soil level, tile type, and area size)

Minimum Service Fee: $150
(can be bundled with carpet cleaning for reduced rate)
 

📌 Applies to:
 

✅ Kitchens
✅ Restrooms
✅ Entryways
✅ Dining areas
✅ Showers & residential tile floors
 

Want a bundled quote? Just ask when you book your carpet or surface service. Clean floors = better health, better presentation, and longer floor life.




 

🧼 Why Tile & Grout Cleaning Costs More Than Carpet — and Why Both Are Worth It

If you’re comparing carpet and tile pricing, you’ll notice tile cleaning runs higher. That’s not because it’s better — it’s because it’s built different.

​

🔹 It’s a Different Kind of Dirty

Tile doesn’t trap soil the same way carpet does — it locks it into grout lines and textured surfaces where mops can’t touch it. Getting that up takes time and pressure — not just surface cleaning.

​

🔹 Heavy-Duty Process

Our tile cleaning process uses:

• High-pressure rotary tools (1,000–1,200 PSI)

• Scrubbing with tile brushes manually 

• Enzyme-based or alkaline degreasers

• Dwell time, agitation, and heat extraction

This isn’t a light pass — it’s a full restoration-level process.

​​

​

💵 Tile Pricing:

$0.50–$1.00 per sq ft
(depends on buildup, area, and access)

Both tile and carpet deserve professional tools and serious methods — and we bring exactly that to every job.

 

“After we deep clean your tile and grout, we can protect it with Aqua Mix Sealer’s Choice Gold — the gold standard used in luxury homes. Service offering Below. It keeps grout and stone looking clean longer, repels stains, and saves you from scrubbing in the future.”


“Unsealed grout is a dirt magnet.
Sealed grout is a stain shield.”

 

🚨 What Happens If You Don’t Seal Your Tile & Grout?

Grout is a sponge.
Every spill, muddy shoe, and shower splash seeps deep inside.

Without sealing, dirt becomes permanent, stains sink in, and mildew takes hold. You can scrub, bleach, and mop — but unsealed grout will just keep soaking up grime like a thirsty rag.
 

🛑 The Ugly Truth

• Stains lock in. Coffee, wine, oil, and soap scum don’t just sit on the surface — they embed.

• Mold and mildew spread. Bathrooms and kitchens are the perfect storm for musty, blackened grout lines.

• Cleaning gets harder and harsher. You’ll end up using stronger chemicals more often — and still not get it looking fresh.

• Your floor ages fast. Tile looks dull, grout looks dirty, and your space feels older than it is.
   

🎯 The Fix

Seal once. Stay clean longer.
A premium penetrating sealer — like Aqua Mix Sealer’s Choice Gold — stops the soaking. Spills wipe away instead of setting in. Mildew has nowhere to hide. Your grout stays fresh and bright, and your tile stays looking new.

 

🔴 Unsealed vs. Sealed Grout
 

❌ Unsealed Grout (The Problem)

• Acts like a sponge – every drop of water, coffee, or mop water soaks in.

• Stains set fast – grease, wine, and soap scum leave marks that scrubbing can’t remove.

• Mildew takes hold – bathrooms and kitchens turn grout lines black and musty.

• Cleaning gets harder – you’ll scrub more, use harsher chemicals, and still never see “new” grout again.
   

✅ Sealed Grout (The Solution)

• Repels spills – liquids bead on the surface instead of soaking in.

• Blocks stains & mold – dirt and mildew can’t embed in the grout.

• Makes cleaning simple – a damp mop or cloth wipes messes away.

• Keeps floors looking new – grout stays bright, tile stays sharp for years.

 

📜 Tile & Grout Sealing Add‑On Service

Service Provided by: [Your Business Name]
Product Used: Aqua Mix Sealer’s Choice Gold – premium, water‑based, professional penetrating sealer trusted by luxury builders and tile installers.
 

✅ What This Service Does for You

• Locks in the fresh, clean look from your professional tile & grout cleaning

• Repels stains, oils, and water so spills sit on top instead of soaking in

• Keeps grout looking brighter longer and makes future cleaning easier

• Premium protection – lasts up to 15 years indoors when maintained correctly

🗣️ “Think of sealing like waxing a car — you wash first, then protect.”
 

🔄 When We Offer It

• ✔️ Only after a professional tile & grout cleaning (done by us)

• ✔️ Applied while grout and tile are clean and completely dry

• ✔️ Ensures dirt and stains aren’t sealed in
   

💵 Pricing

Base Sealing Rate:

• $1.50 – $2.50 per sq ft of tiled area
   

Includes:

• ✅ Full application of Aqua Mix Sealer’s Choice Gold

• ✅ Wipe‑down & buffing to avoid haze or residue

• ✅ Care instructions (stay off the area for 24–48 hours while sealer cures)
   

Optional Add‑On:

• 🔹 Second coat for extra‑porous areas (travertine, limestone, slate, or extra‑wide grout lines): +$0.25–$0.50 per sq ft

🏠 Example Add‑On Costs

AreaSealing Add‑On

Small bathroom (40 sq ft)$60 – $100

Full shower walls + floor (75–100 sq ft)$115 – $250

Kitchen floor (100 sq ft)$150 – $250

Large living area (300 sq ft)$450 – $750
 

🔁 When Is a Second Coat Needed?

• Very porous stone like travertine, limestone, or unfilled slate

• Wide grout joints (¼” or more) that absorb a lot of product

• High‑traffic floors (kitchens, entryways, commercial spaces)

• Wet areas like showers needing maximum water protection
   

🗣️ “We only add a second coat if the surface still absorbs sealer fast after coat one — that way your tile and grout are fully saturated and protected.”
 

📌 Fine Print

• Cure time: Keep sealed areas dry and free of harsh cleaners for 24–48 hours.

• Longevity: Aqua Mix is breathable and long‑lasting — grout typically needs resealing every 3–5 years, stone surfaces can last up to 15 years.
  
  
   

• 🔹 Tile & Grout Sealing – Start to Finish
   

• 1️⃣ Preparation & Inspection

• What staff does:

• Inspect the area after the tile & grout cleaning is complete.

• Make sure all grout and tile are 100% dry (minimum 24 hours after cleaning).

• Check for stains or damage — notify the client if anything won’t be removable.
  
  “We inspect your freshly cleaned tile and grout to make sure it’s dry, spotless, and ready for sealing.”
   

• 2️⃣ Mask & Protect Surroundings

• What staff does:

• Mask off baseboards, carpet edges, cabinets, or walls as needed.

• Place towels or plastic under doorways to prevent sealer tracking.
  
  “We carefully mask and protect surrounding surfaces so sealer only goes where it’s needed.”
   

• 3️⃣ Apply the First Coat of Sealer

• What staff does:

• Use Aqua Mix Sealer’s Choice Gold (premium, water‑based).

• Apply evenly across all grout lines and tile surface (by sprayer, sponge, or applicator bottle).

• Work in manageable sections (50 sq ft or so) to avoid drying on the surface.
  
  “We apply Aqua Mix Sealer’s Choice Gold across all grout and tile — covering every inch for total protection.”
   

• 4️⃣ Dwell & Wipe/Buff

• What staff does:

• Allow sealer to soak in for 5–10 minutes.

• Wipe off excess from the tile surface with microfiber towels to avoid haze or streaking.
  
  “We let the sealer soak in, then buff away the extra so no sticky residue is left behind.”
   

• 5️⃣ Absorption Check

• What staff does:

• After 15–30 minutes, test grout/stone in a few spots with a drop of water or extra sealer.

• If it beads → done (surface is sealed).

• If it soaks in immediately → apply a second coat.
  
  “We check how your tile and grout react after the first coat. If it’s still soaking up sealer, we add a second coat so it’s fully saturated and protected.”
   

• 6️⃣ Optional Second Coat

• What staff does:

• Reapply sealer to only those thirsty areas (porous stone, wide grout).

• Wipe/buff again to remove excess.
  
  “A second coat is only applied if needed — we don’t charge for what you don’t need.”
   

• 7️⃣ Final Buff & Cleanup

• What staff does:

• Buff the entire surface again to ensure no film is left.

• Remove masking, clean tools, dispose of towels.
  
  “We finish by buffing the floor clean and removing all masking — your tile looks perfect the moment we leave.”
   

• 8️⃣ Curing Instructions for Client

• EJD say's:

• Stay off for 1–2 hours if possible.

• No mopping or wet cleaning for 24–48 hours to allow curing.

• Use mild pH‑neutral cleaners going forward (no harsh chemicals).
  
  “We leave you with easy care instructions: keep the area dry for 24–48 hours so the sealer cures and enjoy years of protection.”
  
  🏆 “Our sealing process isn’t just about applying a product — it’s about locking in the clean, fresh look of your grout and stone so you can enjoy beautiful, low‑maintenance floors for years.”

​

​