🧼 Carpet & Upholstery Cleaning

Deep Clean • Safe Products • No Damage Guaranteed

We use A TOP rated commercial-grade extraction BEAST mounted in our Mega service truck yet can Go Portable anytime a carpet must be reached in high rise offices and the like.

Our process starts with an enzyme-driven pre-spray that BREAKS down embedded soils, oils, and odors at the molecular level. Then we extract using a high-pressure Hot water 180–210°F dual-jet wand — operated slowly, deliberately, and with overlapping strokes to ensure maximum soil removal and minimal moisture left behind, unlike rotary tools that risk LEAVING BEHIND MORE WATER and fiber damage. Between our method and Our equipment we deliver a deeper clean, faster dry times, and safer results for your carpet.

Why Our Wand Outperforms Rotary Machines — Every Time

Unlike most providers, we don’t rush the job. We use a high-pressure dual-jet wand, and we move it slowly, deliberately, and repeatedly across your carpet — often overlapping each stroke 2 to 4 times based on how dirty the carpet is.

Here’s why that matters:

Rotary tools are often hyped as "better" simply because they linger longer per square inch — more spray time per GPM. But there’s a tradeoff: rotary machines spread their spray wider than their vacuum coverage, meaning dirty water can sit before it’s extracted.

Our method flips the script.

With our wand system, the vacuum head is positioned immediately behind the jets, pulling up water and soil the instant it’s blasted free. By controlling the speed and overlap of our passes, we match — and often exceed — the cleaning power of rotary tools, while delivering superior water recovery.

The result?

👉 Cleaner carpets.
👉 Faster dry times.
👉 Zero risk of over-wetting or mildew.

It’s not just technique — it’s experience, science, and respect for your floors.

🔥 Real Talk About Carpet Cleaning — No Gimmicks. Just Results.

Water boils at 212°F — yet some companies brag about cleaning with “260-degree steam”? That’s pure marketing nonsense.

Truth is, carpets should be cleaned with water temperatures around (Industry standard for a reason) 180–210°F, max. Anything higher risks damaging fibers and melting glue, this along with leaving carpets holding unseen dirt deep down because those steam systems can’t move enough water to truly flush and extract dirt. Our system follows this standard and blasts your carpet with hot yet safe temps in this range using 4800W of On demand Hot water.

What really works?

✅ A properly timed, enzyme-based 3-in-1 pre-treatment
✅ Agitation via HOT Hi Pressure Spray Blasting to break up soil
✅ Hot water extraction with real volume and real vacuum
That combo melts through grime, breaks down organic gunk, and leaves carpets cleaner and drier than any overhyped “steam” system ever could.

Let’s be honest: Companies will build, sell, and hype anything if the narrative makes it profitable — even if the results are just surface-deep.

I don’t play that game.

I deliver what I would want in my home:
➤ The deepest clean
➤ The most complete rinse for Virtually No residue
➤ The driest, safest results

We treat your space with care using:

✅ Corner guards to protect walls and trim

❓ Which is Better for Carpet Cleaning: Rotary Extraction or Wand Extraction with Proper Pre-spray Dwell Time and Slower Passes?

This is a common debate in the carpet cleaning industry. Rotary extractors are often marketed as deeper cleaning due to their mechanical agitation and multi-directional scrubbing, while traditional wands are seen as more manual but MUCH more widely used by experienced professionals. So, which method actually delivers better results?

✅ Expert Answer:

When performed with professional technique, wand extraction using slow, deliberate strokes that are also 2 - 4 times overlapping AND after appropriate dwell time of pre-spray (typically 10–15 minutes) ALWAYS matches or exceeds the deep cleaning performance of rotary extractors — while leaving carpets noticeably drier.

Here’s why:

💧 Superior Moisture Control with the Wand

A rotary machine can leave behind significantly more moisture, especially if not properly maintained or calibrated.
A high-lift, high-CFM wand setup allows for immediate vacuum recovery during each pull, removing MORE saturation.
The technician maintains full control of the water flow and vacuum balance, reducing the risk of leaving behind dirty water.

🔬 Equal or Better Deep Cleaning with Dwell Time

When pre-spray is given proper dwell time (typically 10–15 minutes), the soil is already emulsified.
Using slow, overlapping wand passes ensures thorough soil removal while leaving behind minimal moisture. And we all know what’s in that water — dirt. That’s the entire principle behind hot water extraction: the water acts as a vehicle, lifting and carrying away embedded soils by dissolving and dislodging them through heat, pressure, and chemical action. The less dirty water left behind, the cleaner — and healthier — the carpet truly is.

🧵 Less Stress on Carpet Fibers

Rotary machines agitate carpet fibers aggressively, which can twist, stretch, or even dislodge them — particularly on residential cut-pile or looped carpets.
Repeated rotary passes may compromise the fiber’s structural integrity over time.
In contrast, Our wand extraction method relies on proper Pretreatment emulsification and Hi pressure Hot water Hi PSI Duel Jets Blasting to achieve Both extraction and Max agitation via the water Jets themselves rather than mechanical agitation, which is Powerful yet gentler and safer for the long-term health of your carpet .

⚖️ The Verdict

While rotary machines may benefit less-skilled operators, a well-trained technician using a wand with proper technique, dwell time, and moisture control will consistently achieve results that are equally deep — and significantly drier — with less wear on your carpet fibers. This is why it is Used MUCH more widely by experienced professionals

For businesses that value both clean and longevity, the wand method remains the gold standard in expert hands.

I’ve worked on high-capacity, widely recognized teams, and I bring that same standard of excellence to every job I touch.

I’m Jason Davis — Lead Tech and Owner — and I personally guarantee you’ll get the kind of results that shut down all the gimmicks.

HOMEPAGE

virtually-Zero Residue Remains! ​ 100% CLEAN!